Maxon Fuzz Elements FE10 Ether

Maxon

FE10 expands on Octave/Fuzz sounds of the FA10 by adding a parametric tone section to the circuit.

By selecting a specific frequency and boosting or cutting it accordingly, a wide array of new and unique guitar tones can be created.

True Bypass Switching lets your instrument's signal pass through a non-electronic bypass line when the effect is disengaged, feeding your amp with direct, unaltered signal from your instrument.

LED to indicate bypass/effect and battery condition for trouble-free performance.

Operates with 9V battery or standard AC adaptor for 9V (not included).

Made in Japan.

Specifications:

• Input Impedance: 100k ohms
• Output Impedance: 100k ohms
• Maximum Gain: 55dB (700Hz) EQ B/C FLAT
• Input Noise: -112dB or less (Input shorted, IHF-A weighted)
• Controls: EXPANDER, LEVEL, EQ B/C, EQ FREQ.
• Switch: BYPASS/EFFECT
• Indicator: BYPASS/EFFECT LED
• Power Supply: 6F22/6LF22 9V battery x 1 or Maxon AC adaptor
• Power Consumption: 12mA max. / 9VDC
• Dimensions: 70(W) x 113(D) x 56(H) mm (with protrusion)
• Weight: Approx. 310g (incl. battery)
• Accessory: 6F22 9V battery x 1, operating manual