drolo Stretch Weaver

drolo

The Stretch Weaver has 2 separate channels that can interact with each other in various ways, mostly through side-chaining where a channel can trigger an action that will be applied to the other channel.

Description of the 8 available modes:

1. stretch
   Each channel can trigger the other to get time stretched. The louder the signal, the longer the stretch. The ctrl knob adjusts the max time stretching overall available.
   
   
2. weave
   Only the right channel is being stretched but the left knob will allow some of the left audio to get weaved in and processed on the left.
   
   
3. repeat
   Each channel can trigger the other to loop the last recorded sample.
   
   
4. tape
   Each channel can change the speed at which the other channel is being played back.
   
   
5. pitch
   Each channel can change the pitch of the other.
   
   
6. glide
   Each channel can trigger the other channel to glide from a very low, almost inaudible pitch up to unison.
   
   
7. gate
   Each channel goes through a gate that only opens when the other channel triggers it.
   
   
8. ringmod
   Each channel can ring modulate the other. When you turn up the ctrl knob the two incoming audio channels will start to get mixed together before being routed to both ringmod processes, so that each channel will increasingly be able to modulate itself.

While it is a dual channel pedal intended to be used with 2 audio sources, if you only plug something into the right channel it will be routed to the left channel so that you can still make sounds (stereo if you wish) and trigger the effects.