VHT AV-MV1 Melo-Verb - Tremolo + Reverb

Pictures

Various

VHT

Two thrilling effects in one.

The VHT Melo-Verb is a pedal recreation of the fabled tremolo and reverb effects that were first introduced as built-in amplifier features in the ‘60s. The two effects sections are completely independent, with separate true-bypass switching.

Tremolo

The all-analog Tremolo section features classic Speed and Intensity controls, and for additional flexibility, it also has modern Shape and Level controls. The Shape control adjusts the tremolo character — everything from retro floating undulations to modern square-cornered chop. When the Tremolo is engaged, the Level control can be set for added boost to help the effect stand-out more in the mix. With the Depth control turned down, the Tremolo section can also serve as a clean boost pedal, with up to 9dB of boost from the Level control — it’s like getting a clean boost pedal for free.

Reverb

The Reverb section replicates the classic built-in tube-driven spring reverb tone, and takes it one step further with the addition of Tone and Mix controls, which were found on the most coveted outboard ‘60s reverb units. The reverb tones range from soft, warm and round to bright splashy “tile wall spatter.”

Soulful Synergy

Separately, these two effects provide a wide range of classic and modern tones — together they’re an unbeatable value.

Controls

  • Tremolo — Speed, Depth, Shape, Level
  • Reverb — Dwell, Tone, Mix
  • Switching — Independent true bypass footswitch for each effect
  • Power — External 9-volt DC power source (tip negative) Model: AV-MV1

Features:

  • Excellent replication of reverb and tremolo circuits from classic amps
  • Precise parameter control
  • Low noise floor

Specifications:

  • Control Layout: top row adjusts the effect’s quality (character), while the lower row adjusts the quantity (amount).
  • Tremolo, top row: Speed and Shape; bottom row: Intensity and Level.
  • Reverb, top row: Dwell and Tone; bottom row: Mix.
  • Switching: Independent true bypass footswitch for each effect, with independent status LEDs.
  • Power: External 9-volt DC power source only, tip negative. (Not included.)
  • Current draw = 85mA.
  • Dimensions: 5” (128mm) x 3.71” (93mm) x 1.33 (33mm)

Most recent forum threads

Link to this page

Here's some code to post a link with image on forums, eBay, websites,...
BB Code
(forums)
HTML Code
(sites, eBay,...)

Where to find one?


your browser doesn't support AJAX?


low frequency oscillator lfo-controlled fx pedal stompbox stomp box guitar effects pedal reverb hall reverberation room delay/reverb tremolo trem volume/amplification modulation modulate time-based lfo
Syndicate content

Subscribe to our newsletter

Close
Also check out Effects Database's social media accounts: