Roland PH-830 Stereo Phaser

Controls

  • Phase Shift (Left/Both/Right)
    selects for which channels the phaser is active
  • Waveform
    selects a waveform for the LFO
  • Sweep Speed
    controls the speed/rate of the LFO
  • Right Channel Inverter On/Off
    inverts the LFO for the right channel
  • Intensity (Left/Right)
    controls the depth/amplitude of the modulation (the size of the range in which the effect sweeps).
  • Shift Frequency (Left/Right)
    sets the center frequency of the phaser
  • Resonance (Left/Right)
    sets the amount of effected signal fed back into the effect (for a stronger effect)
  • Phase Shift/Normal (Left/Right)
    bypasses the phaser for each channel(?)
  • Input Level (-20dB/0dB/+20dB (Left/Right)
    selects an input level
  • Output Level (Left/Right)
    controls the output level

Sockets

  • Ext CV Input (Left/Both/Right)
    ...
  • Inv Remote
    ...
  • Trig Input
    ...
  • Output (L1/L2/R1/R2)
    ...
  • ?
    ...

Most recent forum threads

Link to this page

Here's some code to post a link with image on forums, eBay, websites,...
BB Code
(forums)
HTML Code
(sites, eBay,...)

Where to find one?


your browser doesn't support AJAX?


low frequency oscillator lfo-controlled rackmountable rackmount fazer phaser modulation modulate time-based lfo phazer
Syndicate content

Subscribe to our newsletter

Close
Also check out Effects Database's social media accounts: