Neunaber Technology Immerse - Reverberator


Neunaber Technology

Available March 1, with pre-ordering beginning February 1.

The Immerse Reverberator houses eight stellar stereo reverbs — Wet, hall, plate & spring reverbs, two shimmers, Wet+echo, and Wet+detune. Each effect has been painstakingly crafted: there are no fillers here.

Delivering unrivaled sound quality and no-nonsense flexibility in a compact footprint, the Immerse can be used with instruments of all stripes.

  • Five controls: Effect Select, Effect Level, Reverb Depth, Tone (or Echo Time), Effect Adjust (depends on effect)
  • High-quality buffered bypass with external Trails switch
  • External Kill Dry switch
  • Inputs/outputs can be used mono or stereo
  • Analog dry signal for low noise and zero latency
  • Small footprint
  • Requires standard 9V or 12V pedal power supply (not included, but you may add one.)
  • Designed and manufactured in California USA


How does the Immerse Reverberator compare to Neunaber's other Stereo Pedals?

The Immerse was designed to offer our favorite reverb effects from Pedal Customizer in a simple, stand-alone pedal. The Immerse does not have a USB port, does not work with the ExP Controller or have expression inputs, and does not have programmable second-switch functions like our Stereo Pedals. With Immerse, what you see is what you get.

Is this the same Wet Reverb as the Wet Stereo Reverb?

This is our new-and-improved "Wet Reboot" algorithm from the latest Pedal Customizer software.

How does the Effect Adjust knob work?

It's function changes depending on the effect selected:

  • Wet & Hall: modulation
  • Plate: pre-delay
  • Spring: low-cut
  • Shimmer A & B: shimmer level
  • +Echo & +Detune: reverb level

What does the dotted line coming off the +Detune marker mean?

This is a subtle reminder that this particular effect works best with the Effect Level knob turned to the upper quarter of its range.

What's the difference between Shimmer A & B?

Both are based on our Seraphim Shimmer. The Tone knob on Shimmer A adjusts the tone of the effect. The Tone knob on Shimmer B adjusts the filter selectivity, creating a "breathier" sound when turned up.

Is the Immerse only available with buffered bypass?

Yes, and for good reason: we recommend that a reverb pedal be placed last in an effects chain and that the last pedal be buffered bypass.

Are these same effects available in Pedal Customizer software?

Most are. The remaining few will be added in the next release of the software.



Most recent forum threads

Where to find one?

your browser doesn't support AJAX?

fx pedal stompbox stomp box guitar effects pedal reverb hall reverberation room delay/reverb
Syndicate content

Subscribe to our newsletter

Also check out Effects Database's social media accounts: