Mosky Tone Maker

Various

Mosky

TONE MAKER

4 effects in 1 shell: AMP SIMULATION, CLEAN BOOSTER, DELAY, LOOP.

CLASSIC AMP:

Simulates the British crunch tube distortion and cabinet of 1960A amplifier

Extra amount of gain boost to higher frequency for greater distortion effect. Passive 3 band EQ for nature tone

High Gain and large adjustability range, good dynamic

  • Bass knob: control the amount of low frequency
  • Gain knob: adjusts the amount of distortion
  • High knob: control the amount of high frequency
  • Level knob: control the level of the distorted signal

True bypass for eliminating any signal interference when switched off

TOP BOOSTER:

The Booster is a discrete FET preamp pedal with a low impedance output. It is based around the classic preamp side of an Echoplex and produces a shimmering boost tone that adds some high-end sparkle and definition.

The EP Booster provides up to +20dB of unadulterated boost with multi-dimensional, shimmering highs and lows, and no ear fatigue. The internal DIP switches let you choose the boost frequencies, and EQ settings.

True bypass for eliminating any signal interference when switched off

ANALOG DELAY:

The BJF design Ambient Delay is a natural sounding digital/analog delay, with analog direct signal path. has about the same bandwidth as the classic tape echo units, and it can be used in front of an amplifier .

It is containing just the basic delay features; Delay Time, Delay Level and Repeat controls. It was designed to work as an ambience delay; like that of a vintage tape echo and the repeat formation was specifically designed to allow easy setting and less critical setting of delay time. With delay times higher than 120ms, the delay time is sometimes set on the beat or on a multiple of the beat.

  • LEVEL: Sets the level of delayed signal mixed with straight guitar tone, fully CCW there is only straight (un-effected) guitar signal heard and fully CW gives the loudest delay.
  • DELAY: Controls the delay time from 25ms (fully CCW) to 600ms (fully CW)
  • REPEAT: Controls the repeats of the delay signal, fully CCW gives one repeat and at fully CW you get infinite feedback.

True bypass for eliminating any signal interference when switched off

LOOP

Can access other effects or effects chains

True bypass

Specifications:

  • Power: 9V DC
  • Dimensions:188(L) x120(W) x35(D) mm
  • Weight: 650g

True bypass for eliminating any signal interference when all switched off

Most recent forum threads

Where to find one?


your browser doesn't support AJAX?


multi-effects multi-fx multifx multi effect
Syndicate content



Subscribe to our newsletter

Close
Also check out Effects Database's social media accounts: