> > >
< < <

Mission Engineering VM-1 Aero Volume Pedal

Various

Mission Engineering

The all aluminum switching volume pedal with illuminated base.

At just 1.5lbs, the Aero is half the weight of a standard Mission pedal. The rear cut away and extended length curved surface are ergonomically designed for comfortable use in either standing or sitting positions.

With a passive "no tone suck" circuit, the VM-1 Aero features an isolated tuner output and integrated mode switch. All VM-1 Aero models also include Missions illuminated base. Visible from any position, the transparent acrylic base illuminates indicating selected mode.

Active Mode

Main Output is active with zero volume at heel down and max volume at toe down. Tuner output is disconnected to avoid tone suck. Base illuminates green.

Tuner Mode

Tuner output is enabled. Main output is attenuated providing reduced volume at toe down, and zero volume at heel down allowing tuning silently, or with a small amount of audio. Base illuminates red.

The VM-1 Aero is intended for use first in the signal chain with passive electric guitar pickups only. For other applications, we recommend the Mission VM-PRO.

Illumination requires a 9V battery (included) or external power supply (not included) 9VDC 2.1mm center pin negative. Power required for LED's only. Volume controls will function as normal without power.

  • Input Impedance: 470K Ohm
  • Current draw, nominal: 20mA (180mW) at 9VDC
  • Battery Life, typical: 20 hours
  • Pedal dimensions are 11″ x 4″ x 3″
  • Weight is 1.6lb

Most recent forum threads

Where to find one?


your browser doesn't support AJAX?


foot-controlled threadle wah volume loudness level volume/amplification
Syndicate content



Subscribe to our newsletter

Close
Also check out Effects Database's social media accounts: