Maxon Fuzz Elements FW10 Wind

Various

Maxon

Modeled after the legendary sounds of late 60's British fuzz tones, the FW10's classic circuit design provides a smooth, mid-gain fuzz effect that is rich in harmonic overtones.

In VINTAGE mode the FW10 offers classic 60's fuzz, while HOT mode provides increased gain and additional low-end response.

BUFFER ON/OFF switch engages output buffer when set to ON.  Buffer setting converts signal to low impedance, providing a smoother, more authentic reproduction of original guitar tone.

True Bypass Switching lets your instrument's signal pass through a non-electronic bypass line when the effect is disengaged, feeding your amp with direct, unaltered signal from your instrument.

LED to indicate bypass/effect and battery condition for trouble-free performance.

Operates with 9V battery or standard AC adaptor for 9V (not included).

Made in Japan.

Specifications:

  • Input Impedance: 20k ohms
  • Output Impedance: 10k ohms (BUFFER ON), 50k ohms (BUFFER OFF)
  • Maximum Gain: 57dB (2 kHz)
  • Input Noise: -121dB or less (Input shorted, IHF-A weighted)
  • Controls: ATTACK, LEVEL
  • Switches: BYPASS/EFFECT, VINTAGE/HOT, BUFFER ON/OFF
  • Indicator: BYPASS/EFFECT LED
  • Power Supply: 6F22/6LF22 9V battery x 1 or Maxon AC adaptor
  • Power Consumption: 7mA max. / 9VDC
  • Dimensions: 70(W) x 113(D) x 56(H) mm (with protrusion)
  • Weight: Approx. 320g (incl. battery)
  • Accessory: 6F22 9V battery x 1, operating manual

Most recent forum threads

Related

Link to this page

Here's some code to post a link with image on forums, eBay, websites,...
BB Code
(forums)
HTML Code
(sites, eBay,...)

Where to find one?


your browser doesn't support AJAX?


fx pedal stompbox stomp box guitar effects pedal fuzz distortion/fuzz/overdrive dirt grit
Syndicate content

Subscribe to our newsletter

Close
Also check out Effects Database's social media accounts: