Markbass MB Octaver

Pictures

Various

Markbass

Fatten up and funkify your sound with this sturdy, simple-to-use pedal.

The Markbass MB Octaver adds beefy bottom end and extra funkiness to your sound, and is dead simple to use. The pedal features separate level controls for each octave as well as your dry signal, so you can add thickness by mixing in doubles of your playing pitched one and/or two octaves down. The tracking is super fast!

The MB Octaver gives you a great range of ultra-funky sounds—and it’s dead simple to use.

The pedal features separate level controls for each octave and dry sound so you can add thickness to your sound by mixing in doubles of your playing pitched one and/or two octaves down. This analog stompbox always sounds musical.

The low notes are clear and perfectly in tune, the sound is super clean, and the tracking is super fast.

Like all Markbass pedals, this unit features “true bypass”: that means that when the Octaver is ‘off’, your signal goes directly from the input jack to the output jack with no degradation of audio quality.

Features:

  • Rich analog tone
  • Tracks fast and in tune
  • Simple controls
  • True bypass
  • Controls:
  • OCT 1
  • OCT 2

Specifications:

  • Input: mono ¼” jack
  • Input impedance: 500 Kohm / 2 Vpp
  • Output: mono ¼” jack
  • Output impedance: 100 ohm/6Vpp
  • Controls: Dry/Oct1/Oct2 -∞ ÷ 0dB
  • Dimensions: 81.8 x 54.8 x 124.5 mm / 6.7” x 5.7” x 2.4”
  • Weight: 350 g / 0.77 lbs
  • Power requirements: DC input: +9/+12VDC or standard 9-volt battery

Most recent forum threads

Link to this page

Here's some code to post a link with image on forums, eBay, websites,...
BB Code
(forums)
HTML Code
(sites, eBay,...)

Where to find one?


your browser doesn't support AJAX?


fx pedal stompbox stomp box guitar effects pedal
Syndicate content

Subscribe to our newsletter

Close
Also check out Effects Database's social media accounts: