Ibanez LS10 Dual Loop Selector


  • Level Loop A
    controls the output level (volume) of Loop A
  • Level Loop A
    controls the output level (volume) of Loop B


the Ibanez Power Series pocket manual


The Ibanez LS10 is a switching device which allows you to group your effects into two discrete loops and either switch between them or bypass them completely. Each loop has it's own level control with +/- 6dB of gain control. What's more, you can use the LS10 as an input master switch or as an output master switch by simply varying your patch connections.


The LS10 can be used in many ways, as it provides a choice of 2 signal routes to a final destination. This is most useful when 2 different sets of effects are used for different sounds. For example a "clean chain" using a compresssor and chorus may be switched with "dirty chain" utilizing a distortion and equalizer. Switching between the 2 sounds occurs with one pedal depression of the LS10 (instead of pressing each pedal once). The level of each loop is adjustable. Other applications include switching between 3 guitars or 3 amplifiers by considering sends as outputs and returns as inputs.

Most recent forum threads


  • Input Impedance
    500k Ohms
  • Output Impedance
    < 1k Ohm
  • Send Impedance
    < 1k Ohm
  • Return Impedance
    500k Ohm
  • Maximum Input Level
    +10 dBv
  • Maximum Output Level
    +10 dBv
  • Loop Control Gain
    +6 dB
  • Equivalent Input Noise
    -95 dBv (IHF-A)
  • Power Consumption
    10 mA
  • Power requirements
    9 V DC
  • Dimensions
    125(D) x 70(W) x 54(H) mm
  • Weight


Link to this page

Here's some code to post a link with image on forums, eBay, websites,...
BB Code
(sites, eBay,...)

Where to find one?

your browser doesn't support AJAX?

fx pedal stompbox stomp box guitar effects pedal loop switch looper mix/route/switch accessories related gear
Syndicate content

Subscribe to our newsletter

Also check out Effects Database's social media accounts: