Do-In SCH-1 Stereo Chorus


  • Depth
    controls the strength of chorus
  • Rate
    controls how fast the chorus is moving
  • Time
    controls how far and wide the chorus changes
  • Out1 Level
    controls the output level of output1
  • Out2 Level
    controls the output level of output2



When an input signal is slightly delayed and reintroduced it against the original input signal while simultaneously varying the pitch by a small amount, then a chorusing effect is produced. The combined signals give the effect of two instruments playing at once - a chorus of instruments, so to speak. Unfortunately, many chorus pedals have the tendency to cut low-end frequency, leaving a thin and clinical tone.

The SCH-1 Stereo Chorus was designed to eliminate these problems and provide a rich, thick chorusing that picks up where other pedals leave off. In the current market, almost all chorus effects' circuit design are based on the Bucket-Brigade Delay-line (BBD) IC such as SADxxxx or MN3xxx series. This kind of ICs are very noisy and have poor of frequency response. The SCH-1's circuit is an newest design with newest technology. The circuit is based on the application of DSP (Digital Signal Processor) IC. The combinations of digital and analog circuit offer the SCH-1 with low signal noise and good frequency response, making it suitable for use with any instrument including Bass, Guitar and Keyboards. In addition, the SCH-1 offers a slight level boost when engaged that lets you jump out in the mix and be heard. SCH-1's two processed signal outputs provide the user with a fantastic stereo tone. The DEPTH, RATE and TIME control knobs were custom tuned to provide radical amounts of control. Manipulating them will obtain a wide variety of tones, from subtle detuning to Magnatone-like vibrato and full-throttle rotating speaker effects.

The SCH-1 Stereo Chorus is a professional stomp box with six control knobs for 'DEPTH', 'RATE', 'TIME', 'OUT1 LEVEL' and 'OUT2 LEVEL'. Additionally, it can be powered with a standard 9-volt battery or with an AC adapter( any kind of adapter with DC-9V output). SCH-1 also offers a DC output jack (in the back of the case) for the purpose of supplying DC power to other Guitar Effect. A heavy duty True-Bypass metal switch mounted on the case for toggling the effect on/off and a large red LED status indicator resides on the face of the unit. If you're looking for more from a chorus, the SCH-1 offers twice the tone of the competition!

Most recent forum threads


  • Input Impedance
    470K ohm
  • Output Impedance
    1K ohm
  • True-Bypass Switch
    Heavy duty metal foot switch - toggle the effect on/off
  • Indicators
    LED - effect status and battery level
  • Max Input Level
  • Adjusted Delay Time
  • Speed Frequency
  • Power Supply
    9V battery or any AC Adaptor with 9V DC output
  • Current Consumption
  • Dimensions
    98mm W x 123mm L x 40mm H
  • Weight (w/o battery)
    Approx. 480g

Link to this page

Here's some code to post a link with image on forums, eBay, websites,...
BB Code
(sites, eBay,...)

Where to find one?

your browser doesn't support AJAX?

low frequency oscillator lfo-controlled fx pedal stompbox stomp box guitar effects pedal modulation modulate time-based lfo
Syndicate content

Subscribe to our newsletter

Also check out Effects Database's social media accounts: