Doepfer A-120 VCF1 24dB Low Pass 1

Controls

  • Frq.
    ...
  • CV2
    ...
  • CV3
    ...
  • Lev.
    ...
  • Res.
    ...

Sockets

  • CV1
    ...
  • CV2
    ...
  • CV3
    ...
  • Audio In
    ...
  • Audio Out
    ...

Various

Doepfer

Module A-120 is a voltage controlled low-pass filter, which filters out the higher parts of the sound spectrum, and lets lower frequencies pass through. The Cut-Off Frequency determines the point at which filtering takes effect. You can control this manually, or by voltage control (filter modulation, for instance by an LFO). Three CV inputs are available, and the sum of the voltages from these affects the filter cut-off.

VCF1 is a co-called "transistor ladder" design, with a cut-off slope of -24 dB/octave, as in various Moog synthesizers. That's what gives it its classic, legendary Moog sound.

Resonance (or Emphasis) is adjustable all the way up to self-oscillation - in which case the filter behaves like a sine wave oscillator.

Most recent forum threads

Link to this page

Here's some code to post a link with image on forums, eBay, websites,...
BB Code
(forums)
HTML Code
(sites, eBay,...)
Doepfer A-120 VCF1 24dB Low Pass I

Where to find one?


your browser doesn't support AJAX?


Doepfer A-120 VCF1 24dB Low Pass I gate s-trigger trigger voltage-controlled filter eq/excite/filter module modular lowpass lopass lo-pass lp lpf low-pass filter modules by brand
Syndicate content

Subscribe to our newsletter

Close
Also check out Effects Database's social media accounts: