Analog Hand Clap Stompbox / Module
The Delptronics Thunderclap is a classic analog hand clap effect based on the famous hand clap sound of the TR-808 and TR-909 drum machines. Our version has extra knobs to tweak the sound from claps to finger snaps to snares to cymbals to thunderous crashes.
The Thunderclap has four knobs: noise level, filter, decay and volume. The knobs can be ajusted to create hundreds of unique percussion sounds. Turn the knobs to approximately 11 o'clock for the classic hand clap. Turn them all the way up for an effect that sounds like getting hit in the face with a metal trash can lid!
The Thunderclap can be manually triggered by pressing stomp/trigger button, or externally triggered by any positive pulse from a synthesizer, sequencer, or drum machine. It makes a great accompanyment to a TR-606 or Delptronics LDB-1.
It also also has a built-in mini-sequencer. Hold down the record button to record a sequence of trigger events (button or external) and the pauses between them (e.g.
"clap - - - clap - clap"). Then, whenever it is triggered, it will play back the recorded sequence instead of a single clap. To loop the sequence, hold down the trigger button, then press the record button. A trigger event will stop playback of the loop. Pressing and releasing the record button with no trigger events clears the recorded sequence. The sequence can be up to 32 steps long, and the pauses can total up to two minutes.
The Thunderclap Stompbox comes fully assembled and tested in a heavy-duty aluminum enclosure with awesome graphics (pictured below).
DIY Kit Options
Stompbox Kit includes the circuit board and all parts. It comes with ¼ inch jacks, a big record pushbutton and a stomp style trigger button. It does not include an enclosure, so you can build it into your favorite box, case, container, carton, chest, coffer, crate, or casket.
¼" Module Kit comes with the circuit board and all parts including ¼ inch jacks and two mini pushbuttons. This version of the kit does not include a power connector or panel. If you want to build a 4U or 5U module that uses ¼" or bannana jacks, then this is your best option.
Eurorack Kit comes with the circuit board and all parts including 3.5 mm jacks and two mini pushbuttons. It also inlcudes a Eurorrack power connector and a Eurorack panel (pictured below).