6 Degrees FX
The Gearbox has 3 true bypass loops in 1 compact enclosure.
Having a lot of trouble fitting an extra-wide loop switcher bar on your pedal board? Looper takes that 9VDC plug so the other pedal has to use battery? Right angle plugs get in each other's way and cables won't lay flat?
6 Degrees FX offers a very affordable, compact, superb quality solution - the Gearbox loop switcher.
Gearbox loop switch is loaded with only the highest quality parts and the construction is near indestructible.
20 AWG solid cloth wire offers unparalleled signal quality. Neutrik jacks and trusty Premium Red true bypass switches ensure this little box will survive any accidents and last forever.
The LED channel indicator runs on both 9V DC and battery so you can save a power outlet for another pedal on your board! Best of all, smart spacing on the back panel allows standard right angle plugs to stay flat on pedal board. If you have a pedal train or similar board which you'd prefer to run cables underneath the board, the right angle plugs on the Gearbox loop switcher can make all 6 plugs align perfectly vertical, sending all cables straight down with no mess.
- 4.5" (L) x 3.5" (W) x 2" (H) [2.5" including switches] 0.81 lb
- 11.5 cm (L) x 9cm (W) x 5cm (H) [6.5cm including knobs] 367g
- 9V DC or battery
- True bypass
Special RGB Mix UnderGlow
- Red + Green = Gold
- Red + Blue = Violet
- Green + Blue = Cyan
- Red + Green + Blue = Cold White